Maintenance

The local air and water conditions determine how frequently the Honeycomb media needs to be cleaned. Mineral deposits may accumulate on the Honeycomb Cooling Media in places where the water is strong in minerals, which could obstruct airflow. Mineral deposits can be decreased by draining the water reservoir and refilling it with fresh water at least once each week. If there are still mineral deposits on the Honeycomb media, it should be taken out and thoroughly cleaned with fresh water. Depending on your needs, the medium should be cleaned every two months or sooner.

Unplug the device's power cord from the wall outlet after turning it off. Find the Rear Grill by rotating the device so it is facing the back panel. Use a screwdriver to remove the screws. Pull up on the rear grill panel all the way to remove it. The honeycomb media are now visible. Apply fresh water to the honeycomb medium to clean it. After the cleaning is finished, reassemble the unit Connect the device to the power source and turn it on.

Disconnect the air cooler from the power source after turning the power "off." Allow the tank to empty by removing the cover from the water drain plug, which is situated towards the tank's bottom. Simply reconnect the water drain plug to its original position after draining the water tank. Now top off the water tank to the maximum level, wait five minutes, and then completely drain the water once more. Use pure water for this process to ensure that all dust and contaminants are entirely eliminated. It is advisable to clean the water tank of your cooler at least twice before using it again if it hasn't been used for a while.

Before storing Air Cooler during off-seasons, drain the water tank, clean all components, and let them dry completely. For exhaust fans, deep-clean the entire unit at least once a year to maintain efficiency.